Replacing the Rear AC Expansion Valve of a 1996 Chevrolet Suburban Part 1 (Wrong AC Part)

20 Ansichten

0   0

This is a description of an aftermarket expansion valve for a 1999 Suburban.
I decided to replace this valve because I suspected that the valve was clogged or not working properly because the rear AC was not blowing cold but the front AC was blowing very cold.
After replacing it with a dealer part, it worked fine.
Use a flexible driver to reach the screws by the wall.
Those are the hardest to remove.
You will have to move the box around a little bit to get the screws of the top off.


Mr. Daniel 0078
Mehr anzeigen
test 728
Kommentare

0 Kommentare